Коммутатор Juniper QFX5200-48Y-AFO-T

Технические характеристики Juniper QFX5200-64Q-AFO: QFX5200 (hardware only; software services sold separately), 64 QSFP+/32 QSFP28 ports, redundant fans, 2 AC power supplies, front-to-back airflow Dimensions (W x H x D) QFX5200-32C: 17.36 x 1.72 x 20.48 in (44.09 x 4.37 x 52.02 cm); 1 U QFX5200-64Q: 17.36 x 3.46 x 21.47 in (44.09 x 8.8 x 54.54 cm); 2 U Power Options 100 to 240 VAC (single phase) at 50/60 Hz or –36 to –72 VDC System Throughput Up to 3.2 Tbps Form Factor Fixed-configuration platform Data Rate (switching capacity) Up to 2.44 Bpps Port Densities QFX5200-32C: 32 QSFP+ or QSFP28; 128 10GbE SFP+ through QSFP+ to SFP+ breakout cable; 128 25GbE SFP28 through QSFP28 to SFP28 breakout cable QFX5200-64Q: 64 QSFP+ or 32 QSFP28; 128 10GbE SFP+ through QSFP+ to SFP+ breakout cable; 128 25GbE SFP28 through QSFP28 to SFP28 breakout cable Maximum 10GbE Density 128 Maximum 25GbE/50GbE Densities 128 / 64 Maximum 40GbE Density QFX5200-32C: 32 QFX5200-64Q: 64 Maximum 100GbE Density 32 Resiliency Dual, hot-swappable AC or DC power supplies for 1+1 redundancy Redundant fans Power Consumption QFX5200-32C: 380 W (AC, DC), 1296 BTU per hr typical power draw; 480 W (AC, DC), 1638 BTU/hr max QFX5200-64Q: 600 W (AC, DC), 2047 BTU/hr typical power draw; 675 W (AC, DC), 2303 BTU/hr max Overlay Services OVSDB-VXLAN, EVPN-VXLAN, MPLS, GRE Traffic Monitoring Port-based, LAG port, VLAN-based, ACL-based, Mirror to local and remote destinations (Layer 2 over VLAN) QoS Queues / Port 10 (8 unicast; 2 multicast) MAC Addresses 136,000 Jumbo Frames 9,216 Bytes IPv4 Hosts 104,000 IPv4 Unicast Routes 128,000 prefixes; 64 ECMP paths IPv4 Multicast Routes 52,000 IPv6 Hosts 52,000 IPv6 Unicast Routes 98,000 IPv6 Multicast Routes 28,000 Number of VLANs 4,096 ARP Entries 32,000